37 13 110 Removing and installing/replacing pressure lines for oscillating motor/rear axle

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Remove FRONT PRESSURE LINES (1) (from valve block to junction I on vehicle underbody).

Remove MIDDLE PRESSURE LINE (2) (from junction I to junction III on vehicle underbody).

Remove REAR PRESSURE LINES (3) (from junction II on vehicle underbody to oscillating motor).

Fig 1: Identifying Front, Middle And Rear Pressure Lines

Courtesy of BMW OF NORTH AMERICA, INC.