61 61 270 Removing and installing or replacing bracket for windscreen wiper system complete with motor

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove COWL PANEL COVER .

Release screws (1). Tightening torque 61 61 6AZ .

Disconnect plug connection (2).

Feed out bracket for windscreen wiper system (3) in upward direction.

Installation:

Rubber guide (4) must be correctly seated in guide (5).

Fig 1: Identifying Plug Connection, Windscreen Wiper System, Rubber Guide And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Before installing wiper arms, allow wiper motor to return to its rest position.

To ensure the wiper system works properly, CHECK AND CORRECT the contact angle of the wiper arms.