61 61 010 Checking/adjusting contact angle of windscreen wiper arms on windscreen

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 220
61 6 100

NOTE: The wipe quality is improved by precise adjustment of the CONTACT/APPROACH ANGLE of the wiper arms.

Necessary preliminary tasks

Remove WIPER BLADE (1) FROM WIPER ARM (2) .

NOTE: Pin (3) is locator for special tool 61 6 100 .

Fig 1: Identifying Wiper Blade, Wiper Arm And Pin

Courtesy of BMW OF NORTH AMERICA, INC.

Push special tool 61 6 100 onto pin (1).

Place special tool 61 6 100 on windscreen (2) and read off value in degrees on scale.

NOTE: LHD vehicles are covered by the scale range of 0 to -10 and RHD vehicles by the scale range of 0 to +10.

Fig 2: Placing Special Tool (61 6 100) On Windscreen

Courtesy of BMW OF NORTH AMERICA, INC.

If the specified number in degrees is not correct, the wiper arm must be bent with special tool 00 9 220 at the point shown.

Fig 3: Bending Wiper Arm With Special Tool (00 9 220)

Courtesy of BMW OF NORTH AMERICA, INC.