61 36 540 Removing and installing/replacing air supply unit relay

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove ignition key.
Remove TRIM FOR INSTRUMENT PANEL AT BOTTOM RIGHT .

Release screw (1) and fold down passenger compartment fuse box.

Fig 1: Identifying Passenger Compartment Fuse Box Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Pull air supply unit relay (1) from passenger compartment fuse box.

Fig 2: Identifying Air Supply Unit Relay Of Passenger Compartment Fuse Box

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

Clear fault memory entries