61 12 067 Replacing wiring harness for rear bumper
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove REAR BUMPER TRIM .
Disconnect plug connections (1) on ultrasonic transducer.
Unclip wiring harness from bumper trim and remove.
Installation:
Make sure wiring harness is correctly laid.