32 33 010 Removing and installing/replacing sport steering wheel

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Move wheels into straight-ahead position and do not alter this position during the repair work.
Do not under any circumstances turn the steering-column switch cluster when the steering wheel is removed.

NOTE: Wheel/chassis alignment is not necessary after the steering wheel has been removed and installed or replaced.

Necessary preliminary tasks

Remove AIRBAG UNIT .

Move wheels/sport steering wheel into straight-ahead position.

Disconnect plug connection (1).

If necessary, disconnect plug connection (2) for steering wheel heating.

Release screw (3) and remove sport steering wheel (4).

Installation:

Make sure connecting lead(s) is/are correctly laid.

Tightening torque 32 33 1AZ .

Fig 1: Identifying Plug Connection, Sport Steering Wheel And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Version with steering wheel heating: Before fitting sport steering wheel on steering column, ensure correct cable routing.

Align sport steering wheel by way of marking (1) to steering column marking (2) and attach.

Fig 2: Aligning Sport Steering Wheel By Way Of Marking To Steering Column Marking

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Modify both SWITCHES ON SPORT STEERING WHEEL .
Modify DESIGN COVER/ACCENT TRIM .
If necessary, modify steering wheel module control unit.