41 61 000 Removing And Installing Engine Hood
WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Support engine hood in fully opened position with suitable apparatus. Risk of injury.
NOTE:
Carry over schematic representation to the relevant vehicle type.
Loosen screws (1).
Unfasten screws (2).
Remove hood lid.
Installation:
Install engine hood at screw locations to on hinge. This dispenses with the need for adjustment after installation.
If this is not possible, adjust ENGINE HOOD .
Tightening torque: see 1AZ in 41 61 ENGINE BONNET/HOOD