LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2107 (Integrated Suspension Systems - Repair) >> Connecting Lines >> 37 13 110 Removing and installing/replacing pressure lines for oscillating motor/rear axle

37 13 110 Removing and installing/replacing pressure lines for oscillating motor/rear axle

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Remove FRONT PRESSURE LINES (1)  (from valve block to junction I on vehicle underbody)

Remove MIDDLE PRESSURE LINE (2)  (from junction I to junction III on vehicle underbody)

Remove REAR PRESSURE LINES (3)  (from junction II on vehicle underbody to oscillating motor)

Fig 1: Identifying Front Pressure Lines, Rear Pressure Lines And Middle Pressure Lines
G04794865Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals