72 11 096 Removing and installing/replacing rear left or right lower belt fitting
WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear seat . See REAR SEAT, NORMAL (E82) or REAR SEAT, NORMAL (E88) .
Illustration show removal of the left lower belt fitting; proceed in the same way for the right fitting.
Release screw (1).
Tightening torque, see 72 11 23AZ in 72 11 SEAT BELTS .
Remove lower belt fitting (2).
Installation:
Pin (3) determines the installation position and prevents the lower belt fitting (2) from turning.