LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1974 (Restraints And Towing -- Tightening Torques) >> Seat Belts >> 72 11 Seat Belts

72 11 Seat Belts

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
SEAT BELTS - TIGHTENING TORQUE SPECIFICATION TABLE

- Type Thread Tightening specification Measure
1AZ Seat belt, Automatic reel, Lower strap, Anchor fitting, Belt tensioner to body E36/E31/E38/E39/E46/E52/E53/E83 - Replace screws 31 Nm
Seat belt on B-pillar All, except E53 - Replace screws 31 Nm
Seat belt/belt tensioner to seat, on Touring also to rear seat backrest All, except E52/E53 - Replace screws 48 Nm
2AZ Screws for seatbelt height adjustment on body All - Replace screws 22 Nm
3AZ Seat belt to seat Install bolt with bolt cement. E31 - Replace screws 47 Nm
4AZ Seat belt to backrest E31 - Replace screws 24 Nm
5AZ Headrest to backrest E31 - - 24 Nm
6AZ Seat belt at belt height adjustment (reversing clip) All - Replace screws 31 Nm
7AZ Tension relief between roller sun blind bracket and backrest lock bracket E39/2 - - 24 Nm
8AZ Retaining angle, belt tensioner to seat rail E46/E83 - Replace screws 24 Nm
9AZ Slide bar to body E46 - Replace screws 44 Nm
10AZ Counter-support plate to body, Band C-pillars E53 - - 39 Nm
11AZ Seat belt to seat (end fitting) All - Replace screws 45 Nm
12AZ Screw of seatbelt height adjuster to counter-support plate E53 - Replace screws 31 Nm
13AZ Belt tensioner to seat E83   Replace screws 45 Nm
- E52/E53 - Replace screws 31 Nm
14AZ Inertial reel unit to body/B-pillar E53/E83 - Replace screws 31 Nm
15AZ Automatic reel on rear seat backrest E53 - Replace screws 45 Nm
- E83 - Replace screws 35 Nm
16AZ Belt guide to front seat (sash guide to head restraint clip) E46 Convertible - Replace screws 8 Nm
17AZ Automatic reel to front seat backrest E46 Convertible - Replace screws 39 Nm
18AZ Coupling gearing to centering pin E46 Convertible - - 2.5 Nm
19AZ Corner hoop to side panel, inner (B-pillar) E53/E83 - - 3 ±0.5 Nm
20AZ Upper belt loop to body E83 - Replace screws 31 Nm
21AZ Automatic reel to body E83 - Replace screws 31 Nm
SEAT BELTS - TIGHTENING TORQUE SPECIFICATION TABLE

- Type Thread Tightening specification Measure
Seat belt, front: - - - -
1AZ Automatic reel - - Replace microencapsulated screws -
- to B-pillar E81/E87/E88/E90/E91/E92 - - 36 Nm
- E82 - Hexagon screw with washer 46 Nm
- to backrest frame E93 - - 36 Nm
2AZ Anchor fitting, belt - - Replace microencapsulated screws -
- to front seat E87/E90/E91 - - 44 Nm
- E93 - - 36 Nm
3AZ Belt deflection fitting (to B-pillar, top) E81/E82/E87/E88/E90/E91/E92 - - 36 Nm
- to head restraint bar Build date up to 09/08 E93 M6 - 9 Nm
- to head restraint bar Build date from 09/08 E93 M6 - 8 Nm
4AZ Corner hoop (to B-pillar, middle) E87/E90/E91/E92 - - 3.5 Nm
- E81/E82 M5 - 3 Nm
- E81/E82 M6 Repair screw 3 Nm
- E88 - - 8 Nm
5AZ Slide bar to body E81/E92 - - 36 Nm
- E82/E88 - - 31 Nm
6AZ Buckle retractor to front seat E81/E82/E87/E88/E90/E91/E92/E93 - Replace microencapsulated screws 38 Nm
7AZ Belt hand over E92 - - 2.5 Nm
8AZ Coupling gear (stud) E93 - - 3 Nm
9AZ Coupling gear E93 - - 2.5 Nm
Seat belt, rear: - - - -
20AZ Automatic reel for rear seat, normal - - Replace microencapsulated screws -
- middle to body E90 - - 36 Nm
- outer to body E90/E88 - - 36 Nm
21AZ Automatic reel for rear seat, through-loading - - Replace microencapsulated screws -
- middle to backrest - - - -
- outer to body E81/E82/E87/E90/E91/E92/E93 - - 36 Nm
22AZ Anchor fitting, belt - - Replace microencapsulated screws -
- middle E87/E90/E91 - - 31 Nm
- outer E81/E82/E87/E88/E90/E91/E92/E93 - - 38 Nm
23AZ Seat belt buckle - - Replace microencapsulated screws -
- with buckle retractor E87/E90/E91 - - 38 Nm
- without buckle retractor E81/E82/E87/E88/E90/E91/E92/E93 - - 38 Nm
24AZ Belt deflection fitting (to rollover protection system) E88/E93 - Replace microencapsulated screws 36 Nm