52 24 010 Removing And Installing/Replacing Rear Seat Backrest

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear seat . Refer to 52 24 005 Removing And Installing/Replacing Rear Seat .
Remove guide sleeves for head restraint . Refer to 52 24 475 Replacing Left Or Right Guide Sleeves

Release screws (1) on rear seat backrest.

Tightening torque: see 52 24 01AZ in 52 24 REAR SEAT (NORMAL), MANUAL .

Remove rear seat backrest.

Fig 1: Identifying Screws On Rear Seat Backrest

Courtesy of BMW OF NORTH AMERICA, INC.