22 11 110 Replacing Left Engine Support Arm (N54)

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Secure engine in INSTALLATION POSITION
Remove air intake filter housing. See REMOVING AND INSTALLING/REPLACING INTAKE FILTER HOUSING (N54) .
Remove charge air duct. See REMOVING AND INSTALLING/REPLACING REAR LEFT CHARGE-AIR DUCT (N54) .

Release grounding strap (1) from engine support arm.

Release screw (2) and remove bracket.

Release screws (3).

Remove engine support arm.

Tightening torque 22 11 3AZ .

Fig 1: Identifying Grounding Strap And Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.