22 11 100 Replacing Right Engine Support Arm (N54)
WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove right engine mount. See REPLACING RIGHT ENGINE MOUNT .
- Remove reinforcement plate (AWD).
- Remove catalytic converters. See CATALYTIC CONVERTER (CYLINDERS 1-3) and CATALYTIC CONVERTER (CYLINDERS 4-6) .
Release screws.
Remove engine support arm from engine.
Tightening torque 22 11 3AZ .
NOTE:
Illustration similar.