72 11 096 Removing and installing/replacing rear left or right lower belt fitting
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear seat . See SEATS - REPAIR .
Illustration show removal of the left lower belt fitting; proceed in the same way for the right fitting.
Release screw (1).
Tightening torque, see 72 11 23AZ in 72 11 SEAT BELTS .
Remove lower belt fitting (2).
Installation:
Pin (3) determines the installation position and prevents the lower belt fitting (2) from turning.