LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1936 (Body Equipment - Repair (E82)) >> Hood Latch, Locks >> 51 23 160 Removing And Installing/Replacing Arrester Hook On Engine Hood

51 23 160 Removing And Installing/Replacing Arrester Hook On Engine Hood

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Raise bonnet/hood lid  .

Release screws (1) and remove arrester hook (2).

Tightening torque, see 51 23 1AZ in 51 23 HOOD/BONNET LOCKS .

Fig 1: Identifying Arrester Hook & Screws
G04749752Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals