51 23 Hood/Bonnet Locks
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
HOOD/BONNET LOCKS - TIGHTENING TORQUE SPECIFICATION TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Retaining hook to engine hood/bonnet (replace microencapsulated screws) | E81, E82, E87, E88, E90, E91, E92, E93 | - | - | 10 Nm |
| 2AZ Lock to body (replace microencapsulated screws) | E70, E71, E81, E82, E87, E88, E90, E91, E92, E93 | - | - | 10 Nm |
| 3AZ Upper lock section (striker) to bonnet/hood | E70, E71 | - | - | 10 Nm |