64 11 912 Removing and installing/replacing temperature sensor for heating unit
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove on-board monitor. See 65 82 050 REMOVING AND INSTALLING (REPLACING) ONBOARD MONITOR .
Unfasten plug connection (1) and disconnect.
Pull out temperature sensor for heating unit (2) in direction of arrow.
Installation:
Make sure temperature sensor for heating unit (2) is correctly seated.