67 16 011 Removing and installing/replacing left headlight vertical aim adjuster (xenon headlight)

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Xenon headlights: Danger to life due to high voltage! Therefore disconnect xenon headlights from the power supply.
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.

Necessary preliminary tasks:

Remove LEFT HEADLIGHT

Unlock catches (1) and remove cap (2) in direction of arrow.

Fig 1: Unlocking Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Loosen screws (2).

Feed headlight vertical aim adjuster (3) out of mounting (4) and remove.

Installation:

Headlight vertical aim adjuster (3) must be correctly seated in mounting (4).

Fig 2: Unfastening Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

ADJUST headlights.