51 32 170 Removing and installing/replacing door window glass, front left or right

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Open door window to 205 mm.
Remove SOUND INSULATION IN FRONT DOOR

Door window glass (1) must be opened to dimension (A).

A= approx. 205 mm

Release screws (2).

Installation:

Rubber (3) must be correctly fitted.

Tightening torque: see 2AZ in 51 32 FRONT DOOR WINDOWS

Fig 1: Identifying Door Window Glass And Rubber

Courtesy of BMW OF NORTH AMERICA, INC.

Turn door window glass and lift out towards rear/top.

Installation:

Adjust DOOR WINDOW GLASS

Fig 2: Removing Door Window Glass

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Carry out function check (one-touch function, anti-trapping protection and, if necessary, comfort function).