25 16 065 Replacing gaiter (selector lever cover) for shift tower

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove handle

Carefully pull gaiter taut on leather.
Press frame inwards slightly until catch is released.
Lift out gaiter.

Fig 1: Lifting Out Gaiter
Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs must not be damaged.

Fig 2: Locating Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.