25 16 061 Replacing grip/knob for shift lever
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The method for removing the grip/knob is identical for manual and automatic transmissions.
Do not twist grip/knob when removing as the turning lock in the knob will shear off.
Do not twist grip/knob when removing as the turning lock in the knob will shear off.
Detach grip/knob in direction of arrow with a firm tug.
NOTE:
Illustrations show E85 (Z4).
Installation:
Fit grip/knob on shift lever, align and press on until it can be felt to snap into place.