51 32 154 Adjusting left or right front door window

Special tools required: 

• 61 2 071
• 61 2 210
• 61 3 060

Necessary preliminary tasks: 

• Remove SOUND INSULATION IN FRONT DOOR 

Slacken screws (1 and 2) (do not release fully).

Retaining clip (3) remains fitted.

Fig 1: Identifying Clip And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Screws (1) of power window rails at top must be tightened down.

Connect special tool 61 3 060  to plug connection (3) and special tool 61 2 071  .

Wind special tool 612 071  around cable (4) (risk of damage).

Open door window by approx. 100 mm.

Slacken screws (2) of door window (do not release fully).

Fig 2: Identifying Plug Connection With Special Tool (61 2 071)

Courtesy of BMW OF NORTH AMERICA, INC.

Close door window completely.

Tighten down screws (2) of door window.

Tightening torque 51 32 2AZ .

Using special tools 61 2 210  and 61 2 071  , open door window (1) to approx. 40 mm.

Tighten down screws (2).

Tightening torque 51 33 2AZ .

Fig 3: Identifying Door Window Special Tool (61 2 210)

Courtesy of BMW OF NORTH AMERICA, INC.

Close door window (1) until screw (2) is accessible.

Tighten screw (2).

Tightening torque 51 33 2AZ .

Close door window (1) completely.

Installation: 

INITIALIZE POWER WINDOW .

Fig 4: Identifying Door Window And Screws

Courtesy of BMW OF NORTH AMERICA, INC.