51 16 ... Removing and installing / replacing front insert (on storage compartment trim)

WARNING: This page is about a different car, the 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM FOR STORAGE COMPARTMENT

Security version:

Remove intercom system switch

Build date up to 03/2007:

Release screws (1) and remove insert (2).

Fig 1: Identifying Screws And Front Insert

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully release pin (1) from catch (2) and remove decorative trim from insert (3).

Installation:

Pin (1) and catch (2) must not be damaged.

Fig 2: Removing Decorative Trim From Insert

Courtesy of BMW OF NORTH AMERICA, INC.

Build date from 03/2007:

Release screws (1) and remove insert (2).

Fig 3: Identifying Screws And Insert

Courtesy of BMW OF NORTH AMERICA, INC.