51 11 ... Removing and installing/replacing front fog lamp trim (M aerodynamic kit)

WARNING: This page is about a different car, the 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

64 1 020

Partially fit special tool 64 1 020 as illustrated.

Lever out fog lamp trim (2) at retaining lugs (1).

Feed fog lamp trim (2) out of outer bracket (3) and remove from bumper trim (4).

Fig 1: Identifying Special Tool (64 1 020), Retaining Lugs And Fog Lamp Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) and outer guide (2) of fog lamp trim (3) must not be damaged.

Fig 2: Identifying Retaining Lugs, Outer Guide And Fog Lamp Trim

Courtesy of BMW OF NORTH AMERICA, INC.