66 54 010 Remove and installing complete night vision camera (from 03/2007)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

Remove FRONT BUMPER TRIM
Remove impact absorber in working area

Drill out rivets (1).

Fig 1: Identifying Rivets

G05479180

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Secure night vision camera (1) against falling down.

Disconnect plug connection (2) and release screw (3).

Tightening torque 66 54 1AZ .

Fig 2: Identifying Night Vision Camera, Plug Connection And Screw

G05479181

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Secure night vision camera (1) against falling down.

Disconnect hose connection (2) and unclip cable fastener (3).

Fig 3: Identifying Night Vision Camera, Hose Connection And Cable Fastener

G05479182

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

Fill up with washer fluid

Replacement only:

Replace NIGHT VISION CAMERA