64 12 120 Removing and installing/replacing intake muffler for independent/auxiliary heater
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove left front wheel.
- REMOVE FRONT LEFT WHEEL ARCH LINING .
- REMOVE LEFT UNDERBODY PANELING .
Disconnect plug connections (1) and (2).
IMPORTANT:
To avoid damaging the independent heater, it is absolutely essential to adhere to the following connecting sequence for the plug connections during installation:
- Plug connection (1)
- Plug connection (2)
Release screws (3).
Fold independent heater (4) in direction of arrow to one side.
Installation:
Make sure exhaust pipe of independent heater (4) is correctly seated in muffler (5).
Detach cable strap (1).
Release spring clip (2) and detach corrugated tube from independent/auxiliary heater.
Remove intake muffler for independent/auxiliary heater (3).