51 47... Removing and installing/replacing left or right underbody panelling
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
M5:
- If necessary, slacken tension strut to tunnel screw connection
NOTE:
Hexagon screw in the tunnel bridge area is designed with different washer diameters.
Release plastic nuts.
Release screws (1 to 3).
If necessary, release screw (5).
Release screws (4) and remove underbody panelling in direction of arrow.
Installation:
Replace damaged plastic nuts.