LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1737 (Body Equipment - Repair - E60) >> Parcel Shelf Trim Panel, Roller Sun Blind >> 51 46 006 Removing and installing/replacing trim for rear parcel shelf

51 46 006 Removing and installing/replacing trim for rear parcel shelf

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Necessary preliminary tasks: 

Version without through-loading system: 

Version with through-loading system: 

Version with rear window roller blind only: 

Release screws in luggage compartment.

Installation: 

Tightening torque 51 46 3AZ .

Fig 1: Identifying Luggage Compartment
G05504054Courtesy of BMW OF NORTH AMERICA, INC.

Version with rear window roller blind only: 

Disconnect plug connection (1).

Fig 2: Identifying Plug Connection
G05504055Courtesy of BMW OF NORTH AMERICA, INC.

Release center seatbelt finisher strip (1) and feed out seatbelt strap (3).

Release expander rivet and pull rear parcel shelf (4) forwards.

Feed out left/right seatbelt strap (2) and disconnect speaker plug connection.

Fig 3: Identifying Center Seatbelt Finisher Strip And Seatbelt Strap
G05504056Courtesy of BMW OF NORTH AMERICA, INC.

Pull out rear parcel shelf (2) towards front.

Installation: 

Slide rear window shelf (2) correctly into ventilation grill guides (1).

Fig 4: Identifying Rear Window Shelf And Ventilation Grill Guides
G05504057Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Following parts of center seatbelt finisher strip (3) must not be damaged or missing:

  1. Guides
  2. Retaining lugs
    Fig 5: Identifying Guides And Retaining Lugs
    G05504058Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: The operation "Removing trim for rear parcel shelf" ends here.

If necessary, remove or replace rear window roller blind: 

Lever out protective cap (1) on left/right with special tool 00 9 317  .

Installation: 

Retaining lugs (2) of protective caps (1) must not be damaged or missing.

Fig 6: Identifying Lugs And Protective Caps
G05504059Courtesy of BMW OF NORTH AMERICA, INC.

Lift out shelf (3) over rear groove (1) of rear window roller blind.

Pull front guide (2) out of shelf (3) and remove roller sun blind towards bottom.

Fig 7: Identifying Front Guide And Shelf
G05504060Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: The operation "Removing or replacing rear window roller blind" ends here.

Replacement only: 

Remove left/right MID-RANGE SPEAKER (2) .

If necessary, remove left/right TWEETER .

Remove trims (1) for belt outlet on left/right from rear parcel shelf (3).

Fig 8: Identifying Trims And Left/Right From Rear Parcel Shelf
G05504061Courtesy of BMW OF NORTH AMERICA, INC.