LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1720 (Cooling System - Repair) >> Engine Radiator >> 17 11 000 Removing and installing radiator

17 11 000 Removing and installing radiator

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Danger of scalding!
Only perform this work after engine has cooled down.
IMPORTANT: Wear protective goggles and gloves.

Necessary preliminary tasks: 

Release and disconnect coolant hoses (1).

Lift out radiator (2).

Installation: 

Coolant hoses must audibly snap into place.

Fig 1: Lifting Out Radiator
G05502198Courtesy of BMW OF NORTH AMERICA, INC.