61 71 061 Replacing (removing and installing) fluid reservoir for windscreen washer unit
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove LEVEL SWITCH
- Remove WINDSCREEN WASHER PUMP
- If necessary, remove WASHER PUMP for headlight washer system
Release screws (1) on fluid reservoir for windscreen washer unit.
Release screw (1) and pull fluid reservoir for windscreen washer unit (3) forward in direction of arrow slightly.
Disconnect filler hose (2).
If necessary, detach hose for headlight washer system from fluid reservoir for windscreen washer unit (3).
Remove fluid reservoir for windscreen washer unit (3).
Installation:
- Replace strainers on washer pumps
- Coat sealing rings of washer pumps with antiseize agent
- Lay lines of washer pumps without kinks and clip into holders on fluid reservoir
- Fill fluid reservoir