61 71 100 Removing and installing/replacing windscreen washer pump

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

If necessary, remove left front wheel
Remove FRONT UNDERBODY PROTECTION

NOTE: For purposes of clarity, illustration shows front wheel removed.

Release screws.

Fold back wheel arch trim (1) in direction of arrow.

Fig 1: Folding Back Wheel Arch Trim

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Catch any escaping washer fluid if necessary.

Disconnect plug connection (1).

Detach hose (2) from windscreen washer pump (3).

Pull windscreen washer pump (3) in direction of arrow out of fluid reservoir for windscreen washer unit (4).

Fig 2: Detaching Hose From Windscreen Washer Pump

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace strainer for windscreen washer pump.
If necessary, coat sealing ring of windscreen washer pump with antiseize agent.
Ensure hose is laid without kinks.
Fill fluid reservoir