LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1673 (Body Equipment - Repair) >> Rear Bumper >> 51 12 827 Removing and installing / replacing guide for bottom rear bumper

51 12 827 Removing and installing / replacing guide for bottom rear bumper

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

All except M6: 

Release nuts (1) on guide (2).

Remove guide (2).

Installation: 

If necessary, replace faulty nuts (1).

Fig 1: Identifying Nuts On Guide
G05477473Courtesy of BMW OF NORTH AMERICA, INC.

M6 only: 

Bend guide (1) downwards slightly and release nuts (2) behind.

Remove guide (1).

Installation: 

If necessary, replace faulty nuts (2).

Fig 2: Identifying Guide And Nuts
G05477474Courtesy of BMW OF NORTH AMERICA, INC.