61 31 220 Removing and installing/replacing multifunction steering wheel switches (sport steering wheel, from 09/2005)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove airbag unit. See REMOVING AND INSTALLING/REPLACING AIRBAG UNIT or REMOVING AND INSTALLING / REPLACING AIRBAG UNIT (SPORT STEERING WHEEL)
Release screws (1).
IMPORTANT:
Risk of breakage!
Lever out switches (2) complete with decorative strip (3) all round, do not tilt!
Lever out switches (2) complete with decorative strip (3) all round, do not tilt!
Disconnect associated plug connections and remove switches (2) complete with decorative strip (3).
Installation:
Make sure electrical leads are correctly routed.
Release screws (2) and remove left multifunction steering wheel switches (3) from decorative strip (1).
Installation:
Guide pins (4) must not be damaged and must be correctly inserted.
Make sure there is a uniform gap between both multifunction steering wheel switches (3) and decorative strip (1).