61 67 083 Removing and installing/replacing left or right high-pressure nozzle of headlight cleaning system
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
Necessary preliminary tasks:
- Remove FRONT BUMPER TRIM
To prevent excessive escape of washer fluid, seal off end of high-pressure line with special tool 13 3 010 .
Unlock high-pressure line (1) and detach from high-pressure nozzle (2).
Release screws (3).
Remove high-pressure nozzle (2).
Installation:
New spray nozzles are already preset.
Carry out a function test before fitting bumper trim.