11 23 010 Removing and installing/replacing vibration damper (N52K)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove UNDERBODY PROTECTION .
Remove drive belt

Release screws (1).

Tightening torque 11 23 1AZ .

Remove vibration damper (2).

Fig 1: Identifying Vibration Damper And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.