11 23 Vibration Damper
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - VIBRATION DAMPER
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 3AZ Belt pulley / vibration damper to hub | S38 / B36 | M8 10.9 | 34 Nm | |
| N40 / N42 / N45 / N46 / S38 / B38 | M8 10.9 | 34 Nm | ||
| All / others | M8 | 22 Nm | ||
| 4AZ Belt pulley to vibration damper | S38 / B35 | M8 8.8 | 22 Nm | |
| S50 | M8 8.8 | 22 Nm | ||
| 5AZ Sprocket with hub or hub to crankshaft | M40 | M16 x 1.5 | Replace screw | 310 Nm |
| M42 / M43 / M43TU / M44 | M16 x 1.5 | Replace screw | 330 Nm | |
| 6AZ Hub to crankshaft | N40 / N42 / N45 / N46 | M16 x 1.5 | Replace screw | 300 Nm |