65 77 635 Replacing Sensor Mat For Left Or Right Rear Seat Occupancy Detector (Comfort Seat)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove seat cover for rear seat . See 52 24 400 REPLACING SEAT COVER (NORMAL) FOR REAR SEAT or 52 25 405 REPLACING SEAT COVER FOR LEFT OR RIGHT REAR SEAT .
Remove sensor mat (1) from padding (2).
IMPORTANT:
To avoid malfunctions, make sure sensor mat (1) is cleanly laid:
- Lay plug-in connection in designated recess.
- Lay sensor mat (1) straight and without kinks (large bending radii).
- If necessary, secure sensor mat (1) with adhesive tape provided.
- Feed sensor mat (1) in areas of transition (e.g. seat cushion to side section) cleanly into penetrations of padding (1).