64 51 590 Removing And Installing/Replacing Evaporator (Basic Automatic A/C)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant R 134a . See 64 50 ... INSTRUCTIONS FOR HANDLING REFRIGERANT R 134A .
Follow safety instructions for handling refrigerant oil . See 64 50 ... INSTRUCTIONS FOR HANDLING REFRIGERANT OIL (FOR REFRIGERANT R 134A) .
Follow safety instructions for handling refrigerant R 134a . See 64 50 ... INSTRUCTIONS FOR HANDLING REFRIGERANT R 134A .
Follow safety instructions for handling refrigerant oil . See 64 50 ... INSTRUCTIONS FOR HANDLING REFRIGERANT OIL (FOR REFRIGERANT R 134A) .
IMPORTANT:
Risk of damage!
Restart engine only when A/C system has been correctly filled.
Restart engine only when A/C system has been correctly filled.
NOTE:
If A/C system is opened for more than 24 hours:Replacing drier insert for A/C system
. See 64 53 515 REPLACING DRIER INSERT FOR A/C SYSTEM (AUTOMATIC A/C BASIC) .
Necessary preliminary tasks:
- Draw off refrigerant from A/C system . See 64 50 009 DRAWING OFF, EVACUATING AND FILLING A/C SYSTEM (R 134A) .
- Remove trim panel for pedal assembly. See 51 45 185 REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY .
After installation:
- Evacuate and fill A/C system . See 64 50 009 DRAWING OFF, EVACUATING AND FILLING A/C SYSTEM (R 134A) .
Procedure is described in 64 51 591 REMOVING AND INSTALLING/REPLACING EVAPORATOR (HIGH AUTOMATIC A/C) .