51 45 185 Removing And Installing/Replacing Trim For Pedal Assembly

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Lower trim (2) slightly and disconnect plug connection for footwell light (3).

Remove trim (2).

Replacement only:

Lever out footwell light (3).

Fig 1: Releasing Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Attach hook (2) to carpet lining (3).

Slide trim (4) with guides (5) into holders (1).

Fig 2: Identifying Hook And Carpet Lining

Courtesy of BMW OF NORTH AMERICA, INC.