64 11 943 Replacing Evaporator Temperature Sensor (High Automatic A/C)

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Remove and install panel for pedal assembly. See 51 45 185 REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY .

Press sound insulation for A/C unit at rear left downwards slightly.

Disconnect plug connection (1).

Pull out evaporator temperature sensor (2) in direction of arrow.

Fig 1: Pulling Out Evaporator Temperature Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

When installing evaporator temperature sensor, pay attention to guide (1) in mount (2).

Fig 2: Identifying Guide And Mount

Courtesy of BMW OF NORTH AMERICA, INC.