64 11 911 Removing And Installing/Replacing Temperature Sensor For Heating Unit (Automatic A/C High)

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Remove and install panel for pedal assembly. See 51 45 185 REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY .

Remove center console trim at front left. See 51 16 195 REMOVING AND INSTALLING CENTER ARMREST (FRONT) .

Remove sound insulation for A/C unit at rear left.

Disconnect plug connection (1).

Pull out temperature sensor (2) in direction of arrow.

Fig 1: Pulling Out Temperature Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

When installing temperature sensor, pay attention to guide (1) in mount (2).

Fig 2: Identifying Guide And Mount

Courtesy of BMW OF NORTH AMERICA, INC.