64 11 821 Replacing SERVODRIVE For Fresh Air Flaps (Automatic A/C High)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove holder with servodrive for recirculated air flaps . See 64 11 826 REPLACING SERVODRIVE FOR RECIRCULATED AIR FLAPS (AUTOMATIC A/C HIGH) .
Press lock (1) and unclip servodrive (2) in direction of arrow.
Disconnect plug connection (3) and remove servodrive (2).
Installation:
If necessary, align shaft of flap(s) to be actuated to position of servodrive to be installed.