64 11 813 Replacing SERVODRIVE For Right Hot Air Flap (Automatic A/C High)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove glovebox . See 51 16 366 REMOVING AND INSTALLING RIGHT GLOVEBOX WITH HOUSING or 51 16 367 REMOVING AND INSTALLING RIGHT GLOVEBOX (WITH ACTIVE KNEE PROTECTOR) WITH HOUSING .
Disconnect plug connection (1).
Press lock (2) and unclip servodrive for right hot air flap (3) in direction of arrow.
Installation:
If necessary, align shaft of flap(s) to be actuated to position of servodrive to be installed.