64 11 213 Removing And Installing/Replacing Fan For Heater/Air Conditioner (Automatic A/C High)

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Remove fan cover. See 64 11 225 REPLACING CONTROLLER FOR HEATER - A/C SYSTEM FAN (AUTOMATIC A/C HIGH) .

Unlock catches (1) and remove fan for heater/air conditioner (2) in direction of arrow.

NOTE: Controller for heater - A/C system fan fitted.

Replacement:

Remove controller for heater - A/C system. See 64 11 225 REPLACING CONTROLLER FOR HEATER - A/C SYSTEM FAN (AUTOMATIC A/C HIGH) .

Fig 1: Removing Fan For Heater/Air Conditioner

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining hooks (1) of fan housing (2) must not be damaged and must be fully engaged.

Fig 2: Identifying Retaining Hooks And Fan Housing

Courtesy of BMW OF NORTH AMERICA, INC.