63 21 104 Replacing Sealing Frame For Left Or Right Rear Light (From 03/2005) (On Rear Lid)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove and install left or right rear light . See 63 21 183 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT REAR LIGHT (FROM 03/2005) (ON REAR LID) .
Detach sealing frame (1) in direction of arrow from rear light (2).
Installation:
Make sure sealing frame (1) is correctly bonded all round on rear light (2).