52 24 380 Removing And Installing/Replacing Rear Left Or Right Head Restraint Mount (Normal)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear seat backrest. See 52 24 015 REMOVING AND INSTALLING/REPLACING BACKREST FOR LEFT OR RIGHT REAR SEAT (NORMAL) .
- Remove rear head restraint. See 52 25 390 REMOVING AND INSTALLING OR REPLACING LEFT OR RIGHT REAR HEAD RESTRAINT .
- Remove backrest cover for rear seat. See 52 24 410 REPLACING BACKREST COVER (NORMAL) FOR LEFT OR RIGHT REAR SEAT .
Release screws (1) and feed out head restraint mounting (2) towards bottom.
Installation:
Guide pins of head restraint mount must engage in openings (3) in backrest frame.