51 45 177 Removing And Installing/Replacing Panel For Active Knee Protector On Left
Incorrect handling can activate airbag and cause injury.
Follow instructions for disconnecting and connecting battery.
Disconnect battery negative lead. . See 12 00 ... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY .
Remove middle instrument panel trim. See 51 45 ... REMOVING AND INSTALLING/REPLACING CENTER INSTRUMENT PANEL TRIM .
Remove lighting control unit. See 61 31 037 REMOVING AND INSTALLING/REPLACING LIGHTING CONTROL UNIT .
Remove trim panel for pedal assembly. See 51 45 185 REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY .
Turn plug connection (1) approx. 30° counterclockwise and remove from holder (2).
Unfasten plug connection (1) and disconnect.
Release screws (1).
Installation:
Tightening torque, 51 45 1AZ. See BODY EQUIPMENT - TIGHTENING TORQUES -- ALPINA .
Release screws (1).
Installation:
Tightening torque, 51 45 1AZ. See BODY EQUIPMENT - TIGHTENING TORQUES -- ALPINA .
Remove panel (2).
Do not carry out any repairs on airbag module.
Installation:
Slide guide (1) of steering column panel into mounting (2).