51 24 065 Removing And Installing/Replacing BOWDEN Cable For Manual Rear Lid Unlocking (From 03/2005)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove panel for rear lid at bottom . See 51 49 005 REMOVING AND INSTALLING/REPLACING TRIM FOR LOWER REAR LID .
Detach Bowden cables (1 and 2) from rear lid lock.
Lever out expanding wedge (3) and detach guide (4).
Feed Bowden cable (2) out of Bowden cable (1) and guide (4) and remove.