51 16 ... Removing And Installing / Replacing Guide Rail For Roller Sun Blind Of Left Or Right Rear Door
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front chest strip (chrome strip) . See 51 42 400 REMOVING AND INSTALLING/REPLACING CHEST STRIP (CHROME STRIP) ON LEFT OR RIGHT REAR DOOR (WITH ROLLER SUN BLIND) .
- Disengage roller sun blind . See 51 16 ... DISENGAGING AND ENGAGING ROLLER SUN BLIND ON LEFT OR RIGHT REAR DOOR .
Release screws (1).
Carefully release catch (1).
Lever out guide rail (2) at top (A) and pull out in direction of arrow (B).
Installation:
Make sure guide rail (2) engages correctly in catch (1).
Installation:
If necessary, replace faulty spacer (1).
IMPORTANT:
Guide rail (2) must not be damaged at the bottom otherwise the carriage will break.
Sliding member (3) must not be damaged.
Sliding member (3) must not be damaged.
Installation:
Insert guide rail correctly in brush cable (1) and guide (2).
Installation sequence:
- Install guide rail
- Engage roller sun blind . See 51 16 ... DISENGAGING AND ENGAGING ROLLER SUN BLIND ON LEFT OR RIGHT REAR DOOR .
- Fit front chest strip (chrome strip) . See 51 42 400 REMOVING AND INSTALLING/REPLACING CHEST STRIP (CHROME STRIP) ON LEFT OR RIGHT REAR DOOR (WITH ROLLER SUN BLIND) .