13 71 025 Removing And Installing Raw Air Housing (N62)

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Remove air cleaner element. See 13 72 001 REPLACING AIR CLEANER ELEMENT (N62) .

Release retaining screws on coolant expansion tank.

Remove suction filter housing. See 13 71 000 REMOVING AND INSTALLING INTAKE FILTER HOUSING (N62) .

Press catches (2) together and pull out intake duct (3).

Fig 1: Identifying Catches And Intake Duct

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws.

Remove raw air housing (4).

Fig 2: Identifying Raw Air Housing

Courtesy of BMW OF NORTH AMERICA, INC.